Gates & Fencing

Front, side and rear fences, gates and screens for homes and commercial sites, in timber, steel, aluminium and masonry. Fence height, materials and location all affect whether approval is needed.

What's included

  • Front, side and rear boundary fences
  • Sliding and swing gates
  • Privacy screens and louvres
  • Pool fencing and gates
  • Removal of old fencing

How the job runs

  1. Site visit

    We look at the job with you, talk through what you want, and take measurements. We also note boundaries, ground levels, and what the existing fence is made of.

  2. Written quote

    You receive a written quote that sets out the scope of work, what is and isn’t included, and any allowances for items you are still choosing.

  3. Neighbours and approvals

    For a dividing fence, your neighbour usually needs to be involved. Fences over the exempt height limits need approval. Both should be sorted out before work starts.

  4. The work

    Removal of the old fence, set-out, post holes and footings, then panels, rails and gates.

  5. Final walkthrough

    We go through the finished work with you and note anything that needs attention.

Standards & regulations

Relevant rules for fencing in NSW include:

Exempt development limits for fences
In residential zones, a fence can be built without approval only if it meets every exempt standard. These include a maximum height of 1.8 metres on side and rear boundaries (1.2 metres if masonry) and 1.2 metres on road boundaries, and gates must not open outwards.
Dividing Fences Act 1991 (NSW)
Neighbours generally share the cost of a sufficient dividing fence. A fencing notice is used to propose the work, and if neighbours can’t agree, either can apply to NCAT or the Local Court for a fencing order.
Swimming Pools Act 1992 (NSW) and AS 1926.1 Safety barriers for swimming pools
A pool owner must keep the pool surrounded by a child-resistant barrier. Barriers must meet AS 1926.1, and the edition that applies depends on when the pool was built, so check with your council before changing a pool fence or gate.
Asbestos in older homes
SafeWork NSW advises that any house built or renovated before 1990 could contain asbestos, for example in roofing, eaves, fencing and flooring underlay. Suspect materials should be tested before work starts, and SafeWork NSW recommends using a licensed asbestos removalist.
Before You Dig Australia
A free national service. An enquiry should be lodged before any digging so that owners of underground pipes and cables can send plans. The plans show approximate locations only.

Frequently asked questions

Under the Dividing Fences Act 1991, neighbours generally share the cost of a sufficient dividing fence. You can agree on a different arrangement, and Legal Aid NSW has information on fencing notices and disputes.

In residential zones, up to 1.8 metres on side and rear boundaries (1.2 metres if masonry) and up to 1.2 metres on road boundaries, provided every other exempt standard is met.

Old fibro fencing may contain asbestos. It should be tested first, and SafeWork NSW recommends using a licensed asbestos removalist.

Planning a new fence or gate?

Tell us what you have in mind and we’ll arrange a site visit and a written quote.

Get a Quote