Painting (Domestic & Commercial)

Interior and exterior painting for homes and commercial properties. Most of a good paint job is in the preparation: cleaning, repairing and priming surfaces so the finish coats go on evenly and last.

What's included

  • Protection of floors, fixtures and furniture
  • Surface preparation: cleaning, filling, sanding and priming
  • Ceilings, walls, doors, trims and skirtings
  • Exterior walls, eaves, fascias and timberwork
  • Cutting in by brush, then rolling for an even finish
  • Clean-up at the end of each day and on completion

How the job runs

  1. Site visit

    We look at the job with you, talk through what you want, and take measurements. We also note the condition of the existing paint and surfaces, and the age of the building.

  2. Written quote

    You receive a written quote that sets out the scope of work, what is and isn’t included, and any allowances for items you are still choosing.

  3. Colours and products

    You confirm colours, sheen levels and products before work starts.

  4. The work

    Protection, preparation and repairs, primer or sealer where needed, then finish coats.

  5. Final walkthrough

    We go through the finished work with you and note anything that needs attention.

Standards & regulations

Relevant standards and rules for painting include:

AS/NZS 2311:2017 Guide to the painting of buildings
Gives guidance on good practice for the design, application and maintenance of paint systems.
Lead paint and dust
NSW Government guidance says lead paint was used in most homes built in Australia before 1970, and that lead dust can build up in roof spaces, behind walls and under floorboards. Old paint and dust should be handled with lead-safe work practices.
AS/NZS 4361.2:2017 Guide to hazardous paint management — Part 2: Lead paint in residential, public and commercial buildings
Covers how to find out whether lead paint is present and how to choose a way to manage it.
Cleaning asbestos surfaces
SafeWork NSW warns never to use high-pressure water, a trigger hose or compressed air on asbestos roofing or other asbestos products such as fences, eaves, gutters and downpipes.
Working at heights
Under NSW work health and safety rules, fall risks must be managed at any height, and construction work where a person could fall more than 2 metres needs a safe work method statement. SafeWork NSW prefers working from the ground or using fall-prevention devices such as scaffolds and guardrails.

Frequently asked questions

Yes. NSW Government guidance says lead paint was used in most homes built before 1970. If old paint is in good condition it can be painted over; if it needs sanding or stripping, it should be tested and handled with lead-safe methods.

Only if the surfaces don’t contain asbestos. SafeWork NSW warns never to pressure-clean asbestos roofing, fences, eaves, gutters or downpipes, so older surfaces should be checked first.

Yes, we paint homes and commercial properties. For commercial jobs we talk through access, working hours and any site rules at the site visit.

Planning a paint job?

Tell us what you have in mind and we’ll arrange a site visit and a written quote.

Get a Quote