Pergolas

Timber and steel pergolas for shade and outdoor living areas. A pergola needs solid footings and secure fixing, and its size and position decide whether it needs approval.

What's included

  • Footings and posts
  • Timber or steel framing
  • Roofing or shade options
  • Fixing to the house where suitable
  • Painting or finishing

How the job runs

  1. Site visit

    We look at the job with you, talk through what you want, and take measurements. We also note the size and position of the pergola, and how it would fix to the house.

  2. Written quote

    You receive a written quote that sets out the scope of work, what is and isn’t included, and any allowances for items you are still choosing.

  3. Approvals, if needed

    A pergola can be exempt development if it meets every standard. Otherwise it needs approval, which should be in place before work starts.

  4. The work

    Set-out, footings, posts and framing, roofing or shade, then finishing.

  5. Final walkthrough

    We go through the finished work with you and note anything that needs attention.

Standards & regulations

Relevant standards and rules for pergolas include:

Exempt development limits
In NSW, a pergola can be built without approval only if it meets every exempt development standard. These include a maximum area of 25 m², a floor no more than 1 metre above ground, an overall height no more than 3 metres, a position behind the front building line, and at least 900 mm from side and rear boundaries in most residential zones. Anything outside these limits needs approval.
AS 1684.2:2021 Residential timber-framed construction — Part 2: Non-cyclonic areas
Covers the selection, placement and fixing of structural timber in houses and outbuildings, including alterations and additions. It includes floor framing, flooring and decking.
Before You Dig Australia
A free national service. An enquiry should be lodged before any digging so that owners of underground pipes and cables can send plans. The plans show approximate locations only.

Frequently asked questions

Not if it meets every exempt development standard, including a maximum area of 25 m², a maximum height of 3 metres, and position behind the front building line. Otherwise it needs approval.

Often, yes, if the house structure is suitable to fix to. We check this at the site visit.

Possibly, but a roof adds weight and wind load, so the framing and footings need to suit it. It is easier to plan for this from the start.

Planning a pergola?

Tell us what you have in mind and we’ll arrange a site visit and a written quote.

Get a Quote