Property Extension

A property extension adds new rooms or space to your home, at ground level or as an extra storey. It involves approvals, footings, framing, roofing and finishes, and has to tie in with the existing house. We work through the scope with you and plan each stage before work starts.

What's included

  • Site set-out and excavation
  • Footings and slabs
  • Wall and roof framing
  • Roofing, cladding, windows and doors
  • Joining the extension to the existing house
  • Plumbing and electrical work, carried out by licensed tradespeople
  • Internal linings, flooring and painting

How the job runs

  1. Site visit

    We look at the job with you, talk through what you want, and take measurements. We also note anything that affects the design, such as slope, access, existing services and how the new work joins the house.

  2. Written quote

    You receive a written quote that sets out the scope of work, what is and isn’t included, and any allowances for items you are still choosing.

  3. Approvals

    Extensions generally need either a complying development certificate or a development application, and a BASIX certificate if the work costs $50,000 or more. Approval needs to be in place before work starts.

  4. The work

    Site set-out and excavation, footings and slab, framing, roof, windows and cladding, then services, linings and finishes.

  5. Final walkthrough

    We go through the finished work with you and note anything that needs attention.

Standards & regulations

Extension work in NSW should meet the National Construction Code (NCC), NSW planning rules and the Australian Standards the NCC references. Relevant standards and rules include:

Planning approval in NSW
Some minor work is exempt development and needs no planning or building approval, but only if it meets every standard in the NSW codes. Work that meets all the complying development standards can be approved with a complying development certificate from your council or a registered certifier. Anything else needs a development application to council.
BASIX
In NSW, a BASIX certificate is needed for alterations and additions to a home that cost $50,000 or more, and for pools or spas with a total volume over 40,000 litres.
AS 2870-2011 Residential slabs and footings
Covers site classification and the design and construction of slabs and footings for houses.
AS 1684.2:2021 Residential timber-framed construction — Part 2: Non-cyclonic areas
Covers the selection, placement and fixing of structural timber in houses and outbuildings, including alterations and additions. It includes floor framing, flooring and decking.
AS 3660.1:2014 Termite management — Part 1: New building work
Covers termite management systems for new buildings and new building work.
Bush fire prone land
On bush fire prone land, building work in NSW needs to meet Planning for Bush Fire Protection 2019 and AS 3959:2018 Construction of buildings in bushfire-prone areas, based on the site’s Bushfire Attack Level (BAL).
Before You Dig Australia
A free national service. An enquiry should be lodged before any digging so that owners of underground pipes and cables can send plans. The plans show approximate locations only.

Frequently asked questions

Not always. If the extension meets every complying development standard, it can be approved with a complying development certificate from your council or a registered certifier. If it doesn’t, it needs a development application to council.

BASIX is a NSW building sustainability requirement. A BASIX certificate is needed for alterations and additions to a home that cost $50,000 or more.

Your council can tell you. If it is, the design needs to meet the NSW bush fire rules for the site’s Bushfire Attack Level (BAL).

Planning an extension?

Tell us what you have in mind and we’ll arrange a site visit and a written quote.

Get a Quote