Roofing

Roof repairs, replacement, gutters and downpipes for homes. Roof work happens at height and often on older materials, so safety and checking what the roof is made of come first.

What's included

  • Roof inspections and leak repairs
  • Replacement of metal roof sheeting
  • Gutters, downpipes and flashings
  • Ridge capping and roof repairs
  • Roofing for extensions, pergolas and outbuildings

How the job runs

  1. Site visit

    We look at the job with you, talk through what you want, and take measurements. We also note the roof material, its condition, safe access, and any signs of leaks.

  2. Written quote

    You receive a written quote that sets out the scope of work, what is and isn’t included, and any allowances for items you are still choosing.

  3. Safety set-up

    Edge protection, scaffolding or other fall protection must be in place before roof work starts.

  4. The work

    Removal of damaged material, repairs or new sheeting, flashings, gutters and downpipes.

  5. Final walkthrough

    We go through the finished work with you and note anything that needs attention.

Standards & regulations

Relevant standards and rules for roofing in NSW include:

Roof plumbing in NSW
Roof plumbing covers gutters, downpipes, flashings and metal roof coverings. In NSW, residential roof plumbing work valued at more than $5,000 (including GST) needs a contractor licence.
AS 1562.1:2018 Design and installation of sheet roof and wall cladding – Metal
Covers the design and installation of metal roof and wall cladding.
AS/NZS 3500.3:2025 Plumbing and drainage — Part 3: Stormwater drainage
Covers the design and installation of roof drainage, including gutters and downpipes.
Working at heights
Under NSW work health and safety rules, fall risks must be managed at any height, and construction work where a person could fall more than 2 metres needs a safe work method statement. SafeWork NSW prefers working from the ground or using fall-prevention devices such as scaffolds and guardrails.
Asbestos in older homes
SafeWork NSW advises that any house built or renovated before 1990 could contain asbestos, for example in roofing, eaves, fencing and flooring underlay. Suspect materials should be tested before work starts, and SafeWork NSW recommends using a licensed asbestos removalist.
Cleaning asbestos surfaces
SafeWork NSW warns never to use high-pressure water, a trigger hose or compressed air on asbestos roofing or other asbestos products such as fences, eaves, gutters and downpipes.

Frequently asked questions

If the house was built or renovated before 1990, it could, for example in roofing and eaves. It should be tested before any work, and should never be pressure-cleaned.

In NSW, residential roof plumbing work valued at more than $5,000 needs a contractor licence. You can check any contractor’s licence using the NSW home building licence check.

Yes. We find where the water is getting in, which isn’t always directly above the leak, and repair the sheeting, flashing or gutter at fault.

Need roof work?

Tell us what you have in mind and we’ll arrange a site visit and a written quote.

Get a Quote